Chúng tôi Asahi Vietnam- Pitesco Vietnam đại lý phân phối chính thức các sản phẩm của hãng Asahi tại Việt Nam:

Liên hệ cho chúng tôi theo số 0914738179  để CÓ thông tin mà Quý khách CẦN.  

- Ms Trinh -

< Sales contact>
Email: trinh@pitesco.com
Yahoo :  trinh.pitesco

 Modular assembly, replacement or retrofit without interruption of the process
•    Pressure tight separation of measuring and display parts
•    Interface detection possible
•    Displacement rod available 0.3 – 0.6 m ( 1- 20 ft)
•    Resistant to high pressures ≤ 700 bar (10000 psig) and high temperature ≤ 400°C (752°F)

Application range    

The limit switch can be used for various materials.

This device is suitable for extreme ambient conditions.

Temperatures –60 … +400°C (–76 … +752°F)
Pressure Up to 700 bar (10 000 psig)

If the display cannot be installed from above, e.g. there is an agitator
in the container, it is possible to install it lateral with the special reference
chamber.

In both cases it is important to note that the non-measurable depth
is 340 mm because of the spring mounting.

Product Ammonia
Pressure 450 bar (6525 psig)
Temperature 70°C (158°F)
Measuring range 1500 mm (4.9 ft)
With special versions it is possible to measure the level of the interface between two immiscible liquids of different densities. The displace rod
must be covered completely with liquid. The difference in density should be min. 100 g/l.
≤?340 mm

Typical products are:
 - Water, aqueous liquids
 - Acids/alkalis
 - Organic and inorganic solvents